Cole‑Parmer INC‑200 & INC‑200D | Analog & Digital Clear Incubators-Labcan Scientific

Product Description

The Cole‑Parmer INC‑200 (Analog, legacy Stuart SI60) and INC‑200D (Digital, legacy Stuart SI60D) are 60‑litre clear acrylic benchtop incubators operating at 230 VAC, 50 Hz. Fully transparent acrylic construction enables full‑angle visual observation of samples without opening the chamber door.

Forced‑air circulation delivers stable and uniform temperature distribution inside the chamber. INC‑200 analog model uses calibrated adjustment knob for temperature setting. INC‑200D digital variant is equipped with LCD display for accurate set‑point and real‑time chamber temperature readout. Both models feature one‑touch preset 37°C quick‑access button for routine biological incubation workflows.

Hinged front door provides easy chamber access. Two 10‑mm cable/gas access ports on each side panel allow gas supply or cable feed‑through for external instruments. Built‑in safety thermostat cuts heating power at 72 °C to prevent over‑temperature risk. Base support frame is sold separately. Unit can be placed directly over laboratory instruments for special test requirements. Widely deployed for plant propagation, tropical‑condition simulation, corrosion testing and general‑purpose laboratory incubation, backed by a 3‑year manufacturer warranty

The INC-200 incubators are suitable for multiple applications such as plant propagation, humidity testing, climactic condition simulation, corrosion testing and more. The clear acrylic top and sides make it easy to view your sample from all sides. Forced air circulation and electronic control ensures accurate temperature conditions. A pre-set push switch automatically sets the temperature at 37 ºC, while a safety feature cuts off heating if the unit reaches 72 ºC or higher. Temperature is set via a calibrated knob for the analog model (INC-200), and via an LCD when using the digital model (INC-200D). The latter not only allows more accurate temperature management but also gives a constant reading of actual temperature when in use.The purpose-built design offers easy access to samples – a hinged front door panel and plugged holes (2 x 10 mm diameter) on each of the side panels permits the introduction of gases or cables. These units do not have a base so they can be placed directly over entire instruments; order optional base if needed.

Product Parameters

Item	INC‑200 Analog	INC‑200D Digital
Model	INC‑200	INC‑200D
Cole‑Parmer Part No.	EW‑01110‑02（Former SI60）	EW‑01110‑08（Former SI60D）
Chamber Volume	60 L (2.1 cu.ft)	60 L (2.1 cu.ft)
Chamber Material	Clear Acrylic	Clear Acrylic
Temperature Range	Ambient+5 °C ~ 60 °C	Ambient+5 °C ~ 60 °C
Temperature Fluctuation @37℃	±0.1 °C	±0.1 °C
Temperature Variation between zones	±0.3 °C	±0.3 °C
Control Type	Analog calibrated knob	Digital LCD display
Quick Preset	One‑touch 37°C	One‑touch 37°C
Safety Overtemp Cut‑off	72 °C	72 °C
Side Access Ports	2 × Φ10 mm ports per side	2 × Φ10 mm ports per side
Internal Dimension(W×D×H)	450 × 380 × 380 mm	450 × 380 × 380 mm
External Dimension(W×D×H)	600 × 390 × 390 mm	600 × 390 × 390 mm
Net Weight	11.2 kg	11.2 kg
Power Supply	230 VAC,50 Hz	230 VAC,50 Hz
Required Separately	Support base frame (01110‑97)	Support base frame (01110‑97)
Warranty	3‑Year manufacturer warranty	3‑Year manufacturer warranty

Product Feature

Two control versions: INC‑200 analog knob control; INC‑200D digital LCD display control
60 L large clear‑acrylic chamber, full‑angle sample visual observation
Forced‑air circulation for excellent internal temperature uniformity
One‑touch preset 37°C shortcut button on both models
Hinged front door for convenient sample loading and retrieval
Dual side‑panel 10 mm ports for gas inlet or instrument cable routing
Built‑in overtemperature safety cut‑off at 72 °C
Chamber can sit directly over instruments; supporting base sold separately
Compact benchtop footprint, CE & UKCA certified
Power supply:230 VAC,50 Hz
3‑year original manufacturer warranty

Cole‑Parmer INC‑200(analog) & INC‑200D(digital) 60L clear acrylic incubators 230V 50Hz. Forced‑air circulation, preset 37℃, full sample visibility. Request quotation.